OFFICIAL PRESS RELEASE
Woking, United Kingdom, Jan 29, 2010
While nowhere near as radical as last year’s reinvention of the technical rulebook, 2010’s regulations feature a number of key differences from the previous season.
Outlined below are the major developments, their primary effects and the ways that Vodafone McLaren Mercedes has approached them:
CHANGE - In-race refueling banned
EFFECT - Cars feature significantly larger fuel-tanks; efficient packaging becomes critical; in-race fuel stops will disappear; races will become more dependent on tyre strategy; pitstops will become significantly quicker (around 4 sec or less); cars will be significantly heavier and slower at the start of races, which could have consequences on tyre wear, drivetrain and brake life
CHANGE - Teams unanimously agree to no longer use KERS
EFFECT - Overtaking opportunities available to KERS-equipped cars will disappear; teams have far greater freedom on systems packaging and weight distribution
CHANGE - Narrower width introduced for (dry weather) front tyres
EFFECT - Smaller tyre will have knock-on effect for car aerodynamics and overall car balance
CHANGE - Aerodynamic hubcaps banned
EFFECT - A FOTA cost-saving initiative. Teams will look to recover their aero properties elsewhere
CHANGE - Wheel rim-heaters banned
EFFECT - While tyre blankets are still permitted, the removal of the inner heated core that heats the rim will make tyre warm-up more critical
CHANGE - Minimum weight increased from 605kg to 620kg
EFFECT - Cars will be heavier on track; ballast positioning will become more efficient
CHANGE - On-track aero testing reduced from eight to four days
EFFECT - Requires teams to capitalise on increasingly limited track testing away from the races; windtunnel testing is provided as a substitute
CHANGE - Backmarkers no longer able to unlap themselves behind the Safety Car
EFFECT - Safety Car periods should be shorter and the restart quicker
CHANGE - Points system runs from 1st to 10th (POINTS ORDER TBC)
EFFECT - Greater rewards are now offered to the winning driver, placing more importance on pushing for victory rather than accepting a minor placing; a greater spread of points ought to reward the larger field expected in 2010
CHANGE - Using a second additional engine during a race weekend carries a 10-place grid penalty for the following event
EFFECT - Engine life and effective usage will be even more critical, particularly towards the end of the season
Q&A with Tim Goss (Chief Engineer, MP4-25) and Paddy Lowe (Engineering Director)
The MP4-25 looks very different from last year’s car – what are the principal changes?
Tim Goss: “Following last year’s clarification involving the interpretation of the underbody regulations, the 2010 car has been designed to take greater advantage of the aerodynamic benefits we can derive from the floor. That interpretation led us to change the layout of the rear of the car.
“The car is longer than last year’s car as a result of the additional fuel capacity and we’ve lowered the chassis and bodywork. Plus the removal of KERS has opened up opportunities on internal layout and weight distribution. It’s quite a different aerodynamic treatment to last year.”
The dorsal fin that attaches the top body to the rear wing is very striking – what does it do?
Tim Goss: “The principal knock-on effect of the larger fuel tank was the repositioning of some of the car’s internals. One of the outcomes of that was a decision to move some of the car’s cooling to sit centrally at the rear of the car.
“The dorsal fin is partly to accommodate the additional cooling duct and partly a logical development of the high-downforce wing we ran last year at races like Monaco, which feeds air more efficiently to the rear wing upper element. They’re both quite simple solutions, but they’re actually very neat.”
On a human level, what has the organisation learnt about itself over the past 12 months?
Paddy Lowe: I think we’ve learnt that as a team we can operate effectively and we pull together both in success and in adversity. I think one of the greatest things about last year was the fact that on no single occasion throughout the whole team, whether that’s from shareholders, sponsors, team principal, management through to the night shifters, did I come across any individual blaming another That was a very encouraging situation, and spoke volumes about the degree of team spirit that exists here.”
Looking at the 2010 regulations, the biggest news is the banning of in-race refueling – how has that affected the packaging of the new car?
Tim Goss: “It has definitely been a big challenge fitting twice as much fuel into the car, because you don’t want to increase the chassis length by too much, and you also don’t want to compromise the aerodynamics by making the car too wide. You’ve got to fit radiators into the sidepods, so you’re limited as to how wide you can push the chassis.”
How did you tackle it?
Tim Goss: “In the end, we elected not to compromise the aerodynamics of the car, and, through a rethink of the cooling system layout and electrical packaging, we managed to provide space for the additional fuel capacity while maintaining our aerodynamic philosophy for the bodywork.”
The drivers will be carrying twice as much fuel at the start of each grand prix as they were last year, how will that affect the car’s handling and balance characteristics?
Paddy Lowe: “The biggest problem is just the sheer weight of the fuel – it obviously increases the stopping distance quite considerably. Running with high fuel puts demands on braking – and it means you have to design the brake discs and pads to overcome that. And with a narrower front tyre, you’ll lose grip, which will change the fundamental balance of the car. So we’ve looked at weight distribution, aero balance and mechanical balance in order to compensate for grip balance moving rearwards.”
Do you think the banning of refueling and its effect on the car’s tyres and balance will spice up racing in 2010?
Tim Goss: “It could make the show significantly better, yes. Previously, you knew when everyone was going to stop and refuel, so each team based their strategy decisions on overtaking cars during the pitstops.
“What’s changed for this year is that we won’t know when people are going to stop. The only thing affecting drivers’ mandatory stops now is that they have to run both the Option and Prime tyre, so the strategy choices will be less predictable and will become a little more complicated. Races could be one or two stints with both early and late stops for tyres.”
“And it will definitely make the racing more challenging and interesting – and, hopefully, it will promote more on-track overtaking and less overtaking during the pitstops.”
Finally, what’s on your job list going into the four crucial pre-season tests?
Paddy Lowe: “Initially, the most important thing is proving that the car is robust. Just about everything has changed on the car, there’s very little that hasn’t changed, so we want to make sure we’re fully reliable for the first race.
“At the start of 2009, there were teams who were more competitive than us, but we were still able to pick up a good number of points because we were more reliable. These tests will be about establishing the durability of the car and giving ourselves enough time to fix any issues we encounter.
“In addition, we also want to get a very thorough understanding the new tyre, its degradation and durability, and how to get the best out of it.
“Beyond that, it’ll be about performance development.”
VODAFONE McLAREN MERCEDES MP4-25 TECHNICAL SPECIFICATION
Chassis
Monocoque - McLaren-moulded carbonfibre composite incorporating front and side impact structures
Front suspension - Inboard torsion bar/damper system operated by pushrod and bell crank with a double wishbone arrangement
Rear suspension - Inboard torsion bar/damper system operated by pushrod and bell crank with a double wishbone arrangement
Suspension dampers - Koni
Electronics - McLaren Electronic Systems control units incorporating electronics for chassis, engine and data acquisition. McLaren Electronic Systems also supplies the electronic dashboard, alternator voltage control, sensors, data analysis and telemetry systems
Bodywork - Carbonfibre composite. Separate engine cover, sidepods and floor. Structural nose with intergral front wing. Paint solutions provided by AkzoNobel Car Refinishes using Sikkens Products
Tyres - Bridgestone Potenza
Radio - Kenwood
Race wheels - Enkei
Brake calipers - Akebono
Master cylinders - Akebono
Batteries - GS Yuasa Corporation
Steering - McLaren power-assisted
Instruments - McLaren Electronic Systems
Engine
Type - Mercedes-Benz FO 108X
Capacity - 2.4 litres
Cylinders - 8
Maximum rpm - 18,000
Bank angle - 90°
Piston bore maximum - 98mm
Number of valves - 32
Fuel - ExxonMobil High Performance Unleaded (5.75% bio fuel)
Spark plugs - NGK racing spark plugs specially designed for Mercedes-Benz F1 engine
Lubricants - Mobil 1 – for higher performance, lower friction, better protection, cooling and wear resistance
Weight - 95kg (minimum FIA regulation weight)
Transmission
Gearbox - McLaren-moulded carbonfibre composite. Integral rear impact structure
Gears - Seven forward and one reverse
Gear selection - McLaren seamless shift, hand-operated fly-by-wire
Clutch - Carbon/carbon, hand-operated fly-by-wire
WINTER TEST PROGRAMME
1st - 3rd February Valencia, Spain
10th - 13th February Jerez , Spain
17th - 20th February Jerez , Spain
25th - 28th February Barcelona, Spain
Copyright © 2010, Mercedes-Benz-Blog. All rights reserved.
